GWO Basic Safety Training Offshore Refresher
The GWO Basic Safety Training (BST) Offshore Refresher renews your GWO BST Offshore certificate across all five modules: Fire Awareness, First Aid, Working at Height, Manual Handling and Sea Survival. It is for people who hold a valid BST Offshore certificate, and is delivered at our Manchester centre with the indoor sea survival pool.

Course Information
The GWO Basic Safety Training (BST) Offshore Refresher is for people who hold a valid GWO BST Offshore certificate and need to renew it before it expires. It covers all five modules: Fire Awareness, First Aid, Working at Height, Manual Handling and Sea Survival.
- Fire Awareness
- First Aid
- Working at Heights
- Manual Handling
- Sea Survival
Why Basic Safety Training Matters for Wind Workers
Employers across the wind energy sector require proof of GWO basic safety training before deploying personnel to any wind turbine generator site. The GWO basic safety training standard was developed by the Global Wind Organisation to establish a consistent, internationally recognised benchmark for safety competence. By following GWO training standards, operators and contractors can be confident that all personnel have received the same level of theoretical and practical training. For offshore operations, where rescue services may be far away, this safety training is critical. Completing GWO basic safety training ensures workers can administer safe responses, take correct preventive actions, and make appropriate judgements in emergencies.
Assessment Methods and Records Management
Each module is assessed through practical skill demonstrations and theory components. Delegates must demonstrate competence in realistic scenarios, managing a casualty, using basic handheld firefighting equipment, or performing a rescue from height. Following successful completion, results are recorded in WINDA in line with GWO training standards.
Who is the course suitable for?
This refresher is for people who hold a valid GWO BST Offshore certificate and need to renew it before it expires. If your certificate has lapsed, you will need to complete the full BST Offshore course.
What will I learn?
GWO Fire Awareness - This training is a vital component of ensuring the safety and well-being of professionals working in the wind industry. This comprehensive training equips delegates with essential knowledge about the potential hazards they may encounter in their line of work, specifically related to fire incidents. During the training, delegates learn about the various fire risks that can arise within the unique environment of the wind industry. They become familiar with the different types of fires that can occur and the factors that contribute to their development.
GWO First Aid - Administering safe and effective first aid in the wind turbine industry is of paramount importance to ensure the well-being of workers and to respond promptly to any emergencies that might arise. During the training sessions, participants will gain comprehensive knowledge on crucial subjects such as Personal Protective Equipment (PPE), administering basic first aid, adept assessment and communication, initiating emergency assistance, and effectively employing Automated External Defibrillators (AEDs).
GWO Working at Heights - This training addresses the unique challenges and risks associated with tasks performed at heights in wind turbine environments. Participants will acquire understanding in areas including Personal Fall Arrest Equipment, measures for preventing falls, ladder usage safety, individual and colleague rescue and protocols for handling emergencies.
GWO Manual Handling - Practising safe manual handling practices and the risks associated in performing incorrect techniques.
GWO Sea Survival - equips participants with the essential knowledge and practical skills needed to travel safely to and from offshore wind installations. The course ensures delegates fully understand the survival procedures required when working in and around wind turbines — with a strong focus on offshore transit and safe transfers between vessels and installations. Delegates will learn how to take a proactive, prevention-first approach from the moment they step onto the quay for departure until they return safely. This includes the correct use of safety aids, rescue equipment, and recognised rescue methods.
Prerequisites
- A valid WINDA ID is required.
- Safety footwear is required for all practical sessions.
- A general standard of fitness is required.
- Photographic ID Card, such as a driving licence or passport.
What will I leave with?
Upon completion of the course, delegates will be awarded with GWO approved certification for all five modules: Fire Awareness, First Aid, Working at Height, Manual Handling and Sea Survival.
Certification is valid for 2 years, prior to expiry delegates must redo the refresher course to remain certified.
What to expect on the day
- Registration and Welcome: The day typically begins with registration, where participants confirm their attendance and receive any necessary training materials or equipment.
- Safety Briefing: A safety briefing is conducted to highlight the importance of adhering to safety protocols throughout the training session and in our centre.
- Catering: Lunch is provided on every training day.
Important Information
Participants or individuals booking the course are responsible for ensuring that they meet all the necessary prerequisites and provide the required evidence, such as valid certificates for revalidation courses, on the first day of the course.
Failure to fulfil any of these prerequisites may lead to the participant being requested to leave the course. Please note that no refunds will be issued in such cases.
Core Modules Included in the Basic Safety Training (BST)
The GWO BST Offshore package covers five core modules. Each module includes theoretical and practical training, ensuring delegates can apply learning in realistic scenarios. Successful completion of all five modules leads to a bundled GWO certificate recognised across all GWO member organisations worldwide. The five core modules are First Aid, Fire Awareness, Working at Heights, Manual Handling, and Sea Survival. The Sea Survival module is specific to the offshore BST and is required for anyone working in or around offshore wind installations.
First Aid
The GWO first aid module trains delegates to administer safe and effective first aid in the wind turbine environment. First aid training covers patient assessment, CPR, AED use, wound management, and dealing with shock and fractures. Delegates must demonstrate their ability to manage a casualty scenario, initiate emergency assistance, and use basic personal protective equipment correctly. Assessment focuses on the ability to make appropriate judgements under pressure and administer safe care in a WTG environment.
Fire Awareness
The fire awareness module addresses fire hazards specific to the wind turbine environment. Delegates learn to identify fire hazards early, take correct preventive actions, and use basic handheld firefighting equipment to efficiently extinguish an initial fire. Practical training includes smoke evacuation drills and emergency breathing exercises. Delegates also learn to manage evacuation procedures and recognise when an unmanageable fire requires full evacuation rather than intervention.
Working at Heights
GWO working at heights training covers harness inspection, fall arrest systems, and safe anchor point use. Practical training includes suspended-rescue drills and live-casualty rescue scenarios. Delegates must demonstrate competence through scenario-based assessments in a remote wind turbine environment, covering ladder safety, fall prevention, and emergency response protocols.
Manual Handling Module
The manual handling module addresses one of the most common causes of musculoskeletal injuries in the wind turbine industry. Training covers safe lifting planning, task risk assessment, and correct lifting technique exercises. Delegates learn to take correct preventive actions before a lift, identify when mechanical assistance is needed, and reduce the risk of musculoskeletal injuries throughout their career.
Sea Survival Module (Offshore Focus)
The GWO sea survival module equips delegates with practical survival skills for offshore environments. Practical training includes immersion suit donning, life raft deployment, water-entry techniques, and raft boarding drills. The sea survival module also covers transfer procedures between installation vessels and offshore platforms, man-overboard response, and recognised rescue methods, ensuring personnel can act safely throughout offshore operations.
Training Logistics and Practical Course Details
The GWO BST Offshore Refresher runs over 3 days at our Manchester training centre. Training days begin with registration and a safety briefing, followed by a mix of theoretical and practical training sessions. Lunch is provided on full training days. Delegates should bring comfortable clothing suitable for practical exercises and their safety footwear. Personal protective equipment for each module is provided on site.
Certification, Validity, and Refresher Requirements
The GWO BST certificate is valid for two years from the completion date. Refresher training can be taken up to two months before the current certificate expires whilst maintaining the original certification date. If the certificate lapses, delegates must retake the full initial training rather than the shorter refresher course. All records are uploaded to the WINDA database, which maintains certification status for all GWO courses and providers.
How to book
To book, call 07441 344 367 or enquire by email at training@maritime-construction.com. For group bookings, request a group quote. Make sure you have your WINDA ID, photographic ID, safety footwear and swimwear ready before your start date.
Next course dates
Open course dates and places are shown live in our booking system. Pick a date and pay online to secure your place. Courses start at 9am. No date that works? Call 07441 344 367 and we will do our best to help.
What to bring
Courses start at 9am. Please arrive in time to register. The centre is at Unit 6, Waters Edge Business Park, Modwen Road, Manchester M5 3EZ.
- Photo ID. A valid passport or driving licence, matching the name on your booking.
- Your WINDA ID, if you have one. If you do not, we will create it for you.
- Evidence of your current certificate for the refresher.
- Safety footwear for the practical sessions, and comfortable clothing. We supply the PPE for each module.
- Swimwear for Sea Survival in our indoor pool.
- Fitness. Some GWO training is physically demanding. You will complete a medical self-screening form before the course, and a general standard of fitness is required.
- Lunch is provided on full training days. Parking is available on site.
Booking for yourself
Pick a date and book your place online. Payment is taken in full when you book, and you will get a confirmation email. Prefer to talk? Call 07441 344 367 or email training@maritime-construction.com.
If you cancel more than 14 days before the course, you can have a full refund or a free transfer.
Booking for your team
Need a crew certified before mobilisation, or a block of tickets about to lapse? We run group and closed courses around your dates, and we can invoice the company. Tell us the headcount and dates and we will send a quote.
Common questions
Anything else? Call 07441 344 367 or email training@maritime-construction.com.
When should I book my refresher?
Before your current certificate expires. Refreshing in time keeps your original certification date. If your certificate lapses, you will need to retake the full initial training.
What do I need to bring?
Valid photo ID (passport or driving licence), safety footwear for the practical sessions, and your WINDA ID. If you do not have a WINDA ID, we will create one for you. For refresher courses, bring evidence of your current certificate.
How long is the certificate valid?
GWO certificates are valid for two years and are recorded on WINDA. Complete your refresher before the certificate expires to keep your original certification date. If it lapses, the full initial course is required.
What time do courses start?
Courses start at 9am. Please arrive in time to register. Training is at Unit 6, Waters Edge Business Park, Modwen Road, Manchester M5 3EZ.
Is lunch provided?
Yes, lunch is provided on full training days.
Is there accommodation nearby?
Yes. Hotels near the centre are available from £35 a night (room only), subject to availability. Manchester Airport is 15 minutes away.
Is there parking?
Parking available on site
Can I book for a group or team?
Yes. We run group and closed courses, and invoicing is available for company and group bookings. Call 07441 344 367 or request a group quote.
What if I need to cancel?
If you cancel more than 14 days before the course, you can have a full refund or a free transfer. If you do not attend without telling us, there is no refund or free transfer. See our terms and conditions.
Is there a minimum age?
Delegates must be 18 or over.
Is there a medical or fitness requirement?
Delegates complete a medical self-screening form before attending, as some GWO training is physically demanding. A general standard of fitness is required.
Book for yourself, or get tickets for your team.
Book a place online or by phone, or request a group quote for your crew. Courses start at 9am.

