GWO Manual Handling
GWO Manual Handling is a globally recognised safety training standard developed by the Global Wind Organisation to enable participants working in the wind industry to perform manual handling tasks safely and reduce the risk of musculoskeletal injuries. Manual handling refers to transporting or supporting loads by hand or bodily force, including lifting, lowering, pushing, pulling, or carrying. It is one of the most common causes of workplace injury across all sectors, and the risk is heightened in demanding physical environments such as wind turbine sites.

What Is GWO Manual Handling?
The GWO manual handling module combines theoretical and practical training to equip wind turbine technicians and site personnel with the knowledge and skills to perform manual handling tasks in a safe and sound manner. Participants learn essential manual handling principles, ergonomic techniques, and basic risk assessment methods tailored specifically to the wind turbine environment.
Course Information
The GWO Manual Handling training is a course designed to equip individuals in the industry with the necessary skills and knowledge to handle objects and perform tasks in a way that minimises the risk of injuries related to lifting, carrying, pushing, and pulling.
Participants will explore subjects including correct lifting methods, secure carrying and transportation, risk evaluations, and injury prevention techniques. GWO Manual Handling is a mandatory training course for all personnel working in the wind industry.
Why GWO Manual Handling Training Matters
Poor manual handling techniques are a major cause of musculoskeletal injuries at work, placing unnecessary strain on the spine, joints, and muscles with potentially lasting consequences. Under the Manual Handling Operations Regulations 1992, employers must avoid hazardous manual handling operations wherever reasonably practicable and reduce risk through mechanical aids, training, and control measures. GWO manual handling training supports employers in meeting these legislative requirements while aligning with recognised training standards across the wind turbine industry.
The aim of GWO manual handling training is to enable participants to perform manual handling tasks in the safest possible way. The course covers essential risk reduction techniques, correct posture, use of mechanical aids, and the TILE method for assessing risks associated with manual handling tasks, giving workers the knowledge and skills to operate safely in a wind turbine environment.
Who is the course suitable for?
This GWO manual handling course is designed for anyone working in or entering the wind turbine industry, including offshore and onshore technicians, site personnel, and workers whose work duties involve performing physical tasks in a wind turbine environment. It is a core module of the GWO Basic Safety Training programme and is required by most wind farm operators before personnel can carry out job tasks on site. Participants in GWO manual handling training must meet GWO Requirements for Training and demonstrate fitness to perform the practical exercises included in the course.
What will I learn?
- Demonstrate correct manual handling techniques.
- Comprehending the potential hazards associated with improper manual handling techniques.
Prerequisites
- A valid WINDA ID is required.
- Safety footwear is required for all practical sessions.
- A general standard of fitness is required.
- Photographic ID Card, such as a driving licence or passport.
What will I leave with?
After successfully finishing the course, participants will receive a GWO-approved Manual Handling certificate, which remains valid for a duration of two years. To maintain their certification, delegates are required to undergo GWO Manual Handling Training again before the certificate's expiration date.
What to expect on the day
- Registration and Welcome: The day typically begins with registration, where participants confirm their attendance and receive any necessary training materials or equipment.
- Safety Briefing: A safety briefing is conducted to highlight the importance of adhering to safety protocols throughout the training session and in our centre.
- Catering: Lunch is not provided on half-day courses.
Important Information
Participants or individuals booking the course are responsible for ensuring that they meet all the necessary prerequisites and provide the required evidence, such as valid certificates for revalidation courses, on the first day of the course.
Failure to fulfil any of these prerequisites may lead to the participant being requested to leave the course. Please note that no refunds will be issued in such cases.
Manual Handling Risk Assessment
A manual handling risk assessment is a structured process used to assess the risks associated with specific manual handling tasks. It takes into account the task itself, the load, the working environment, and the individual. Where hazardous operations cannot be avoided, employers must put control measures in place to reduce risk. GWO manual handling training teaches participants to carry out effective assessments and apply practical guidance to their own wind turbine environment.
Certification
Upon successful completion, delegates receive a GWO manual handling certificate valid for 2 years. Certification should be renewed before the end of the validity period, and certificates can be renewed up to two months prior to expiry while maintaining the original certification date.
Book Your GWO Manual Handling Course
Book your place at our Manchester training centre today. For group bookings or queries, contact our team directly. Visit our booking page to add your place to the basket or request a date that suits your team.
- If no dates are available, please call and we’ll do our best to assist: 07441 344 367
Next course dates
Open course dates and places are shown live in our booking system. Pick a date and pay online to secure your place. Courses start at 9am. No date that works? Call 07441 344 367 and we will do our best to help.
What to bring
Courses start at 9am. Please arrive in time to register. The centre is at Unit 6, Waters Edge Business Park, Modwen Road, Manchester M5 3EZ.
- Photo ID. A valid passport or driving licence, matching the name on your booking.
- Your WINDA ID, if you have one. If you do not, we will create it for you.
- Safety footwear for the practical sessions, and comfortable clothing. We supply the PPE for each module.
- Fitness. Some GWO training is physically demanding. You will complete a medical self-screening form before the course, and a general standard of fitness is required.
- Lunch is not provided on half-day courses. Parking is available on site.
Booking for yourself
Pick a date and book your place online. Payment is taken in full when you book, and you will get a confirmation email. Prefer to talk? Call 07441 344 367 or email training@maritime-construction.com.
If you cancel more than 14 days before the course, you can have a full refund or a free transfer.
Booking for your team
Need a crew certified before mobilisation, or a block of tickets about to lapse? We run group and closed courses around your dates, and we can invoice the company. Tell us the headcount and dates and we will send a quote.
Common questions
Anything else? Call 07441 344 367 or email training@maritime-construction.com.
What do I need to bring?
Valid photo ID (passport or driving licence), safety footwear for the practical sessions, and your WINDA ID. If you do not have a WINDA ID, we will create one for you.
How long is the certificate valid?
GWO certificates are valid for two years and are recorded on WINDA. Complete your refresher before the certificate expires to keep your original certification date. If it lapses, the full initial course is required.
What time do courses start?
Courses start at 9am. Please arrive in time to register. Training is at Unit 6, Waters Edge Business Park, Modwen Road, Manchester M5 3EZ.
Is lunch provided?
No. Lunch is not provided on half-day courses.
Is there accommodation nearby?
Yes. Hotels near the centre are available from £35 a night (room only), subject to availability. Manchester Airport is 15 minutes away.
Is there parking?
Parking available on site
Can I book for a group or team?
Yes. We run group and closed courses, and invoicing is available for company and group bookings. Call 07441 344 367 or request a group quote.
What if I need to cancel?
If you cancel more than 14 days before the course, you can have a full refund or a free transfer. If you do not attend without telling us, there is no refund or free transfer. See our terms and conditions.
Is there a minimum age?
Delegates must be 18 or over.
Is there a medical or fitness requirement?
Delegates complete a medical self-screening form before attending, as some GWO training is physically demanding. A general standard of fitness is required.
Book for yourself, or get tickets for your team.
Book a place online or by phone, or request a group quote for your crew. Courses start at 9am.

